Description
Anti noise and anti vibration pads GELTEC S850 made in Europe
1. Product characteristics
GELTEC is elastomeric pad made from a mixture of SBR granulated Rubber and polyurethane binder.
Use:
– universal damping, anti noise and anti vibration pads
– elastomeric mats, under-gravel mats
– Underlay, expanding, diving and anti slip mats
– tiles for sport systems
– insulation of buildings, roadways, pillars and beams, storage of industrial machines
– panelling for shooting ranges
– its characteristics distinctly increase the durability of building constructions against heavy loads
and shaking.
2. Technical parameters
Stadard unformatted size 2 000 x 1000 m. Products can make in dimensions 1 000 x 1 000 mm and
1 000 x 500 m.
Basic variants GELTEC S850
Code Name Weight (kg)
HD4-03-0300-00-850 GELTEC S850 2 000 x 1 000 x 3 5,1
HD4-05-0300-00-850 GELTEC S850 2 000 x 1 000 x 5 8,5
HD4-06-0300-00-850 GELTEC S850 2 000 x 1 000 x 6 10,2
HD4-08-0300-00-850 GELTEC S850 2 000 x 1 000 x 8 13,6
HD4-10-0300-00-850 GELTEC S850 2 000 x 1 000 x 10 17,0
HD4-12,5-0300-00-850 GELTEC S850 2 000 x 1 000 x 12,5 21,3
HD4-15-0300-00-850 GELTEC S850 2 000 x 1 000 x 15 25,5
HD4-20-0300-00-850 GELTEC S850 2 000 x 1 000 x 20 34,0
HD4-25-0300-00-850 GELTEC S850 2 000 x 1 000 x 25 42,5
HD4-30-0300-00-850 GELTEC S850 2 000 x 1 000 x 30 51,0
HD4-40-0300-00-850 GELTEC S850 2 000 x 1 000 x 40 68,0
HD4-50-0300-00-850 GELTEC S850 2 000 x 1 000 x 50 85,0
HD4-60-0300-00-850 GELTEC S850 2 000 x 1 000 x 60 102,0
Technical parametres
Bulk Density 850 kg/m3
Tensile strength 0,9 MPa
Elongation 61 %
Tensile strength after storage oil 0,2 Mpa
Change in tensile strength after storage in oil – 78 %
Elongation after storage in oil 30 %
Change in elongation after storage in oil – 51 %
Water absorption 14 %
Static moduls of deformation 18,4 MPa
Static surface stiffness 0,22 N.mm-3
Dynamic surface stiffness for a load frequency of 1 Hz 0,247N.mm-3
Dynamic surface stifness for a load frequency of 3 Hz 0,266 N.mm-3
Dynamic surface stifness for a load frequency of 5 Hz 0,276 N.mm-3
Dynamic surface stifness for a load frequency of 10 Hz 0,292 N.mm-3
Dynamic surface stifness for a load frequency of 20 Hz 0,295 N.mm-3
Dynamic surface stifness for a load frequency of 30 Hz 0,297 N.mm-3
Dynamic stiffness increase for a load frequency of 1 Hz 0,89
Dynamic stiffness increase for a load frequency of 3 Hz 0,83
Dynamic stiffness increase for a load frequency of 5 Hz 0,80
Dynamic stiffness increase for a load frequency of 10 Hz 0,75
Dynamic stiffness increase for a load frequency of 20 Hz 0,75
Dynamic stiffness increase for a load frequency of 30 Hz 0,74
Static modulus of elasticity E-stat 5,5 MPa
Dynamic modulus of elasticity E-dyn (for 10Hz frequency) 7,3 Mpa
Resistance to cyclic freezing and thawing 1
Long-term temperature stability From 30 °C To 80 °C
Length tolerance (0 – 300 mm) ± 3 mm
Length tolerance (300 mm and more) ± 1 %
Density tolerance ± 40 kg/m3
Density toleranca for surface area ≤ 0,25m² ± 60 kg/m3
Thickness tolerance (3 – 4 mm) ± 0,6 mm
Thickness tolerance (4,1 – 6 mm) ± 0,5 mm
Thickness tolerance (6,1 – 10 mm) ± 0,6 mm
Thickness tolerance (10,1 – 25 mm) ± 0,8 mmThickness tolerance (25,1 – 40 mm) ± 1,0 mm
Thickness tolerance (40,1 – 60 mm) ± 1,5 mm
Reaction to fire according to ČSN EN 13501-1 + A1 Efl
Compressive stress at 10% strain 0,17 MPa
Compressive stress at 20% strain 0,52 MPa
Shore hardness 48 ⁰Sh3.
3. Packaging and storage
The pads are stored on wooden pallets, wrapped in a non-transparent stretchy film. The amount on
each pallet depends on the thickness of each pad, maximum weight on a palle tis 1 500 kg.
The pads can be stored at temperatures between -20 and +40 °C, it is necessary to protect them
from the rain and snow during storage.
4. Guarantee
The warranty for GELTEC S850 products is 24 months.
5. Validity of the document
The information given is valid at the time of issue of the technical data sheed and is based on objective
testing and the manufacturer´s own experience.
The manufacturer reserves the right to change these data.
Changes may be agreed with the customer in a additional contract or other agreed document.
Recent Comments